Starter bearings (commonly known as copper sleeves) often experience loose shaft necks and copper sleeves due to excessive wear during normal use, ultimately affecting the performance of the starter.

Using a sound detector to check the size and sound quality of the rolling sound of the running bearings. Even if there is slight peeling or damage to the bearings, abnormal and irregular sounds will be emitted, which can be distinguished by the sound detector.

High specification bearings for mechanical equipment used in power stations, gas turbines, and power plants.

If users can obtain cooperation from professional bearing enterprises in the business of repairing bearings, they may benefit from the following:

Rolling bearings are mass-produced mechanical parts with strict manufacturing accuracy requirements and a high degree of technical specialization. Therefore, for the vast majority of easily available bearing varieties, it should be more cost-effective to purchase than repair. Only under the following circumstances should bearing repair be considered

It must be recognized that clearance is an important factor in the normal operation of imported bearings.Choosing the appropriate bearing clearance has many benefits for the bearing: it can distribute the load reasonably between the rolling elements;

Having been doing non-standard work for so long, the tolerance fit between bearings and shafts, as well as the tolerance fit between bearings and holes, has always been able to achieve functionality with small clearances, and is easy to install and disassemble. However, some local parts still need to have a certain degree of fitting accuracy.

All lubricant products are designed with the operating temperature range in mind

The materials used for rolling bearings include rolling bearing parts, retaining frames, rivets, and other auxiliary materials.

Common bearing codes are commonly used for selecting bearings, but bearing codes are quite complicated. If the agricultural machinery palm grasps the pattern of identifying bearing codes, the selection will be easy.

During use, it is necessary to regularly monitor the basic external conditions of bearing operation, such as temperature, vibration, and noise measurement.

A shaft is supported by two bearings in the radial and axial directions. One side of the bearing is called a fixed end bearing, which bears both radial and axial loads and plays a role in fixing the relative axial displacement between the shaft and the bearing housing.